Dispensing & Sampling Booths are designed to give a mixed air flow stream for product, operator and environmental protection and are used to control the hazardous emissions of dust powder during the powder dispensing/sampling process.

JFT MAKE Dispensing / Sampling Booth provides a safe, HEPA Filtered environment, for the dispensing of hazardous drug powders.

The air forced downwards is extracted at a low level into the booth’s filtration system where dust particles are contained at each level of filtration prior to being re-circulated back into the booths’ air stream. When the Booths is operating under normal conditions air is pulled through the main working chamber to exhaust grills, normally situated in the rear of the Booths, suppressing airborne dust away from the operators breathing

Technical Specifications

DescriptionSpecifications
ProductDispensing Booth
MOCGI powder Coated, SS 304 / SS 316
CleanlinessClass 100, ISO - 5
Internal Area915x1220x1980 MM, 1220x1220x1980 MM, 1830x1220 x1980 MM
FiltrationThree Stage Filtration
PRE-FilterEU-4 90% down to 10 micron
HEPA FilterEU-14 99.995% down to 0.3 micron
Motor-BlowerMotor-Blower are Statically & Dynamically balanced with the suitable suspension to reduce noise level
Noise Level65 dB ± 5
AirflowVertical Re-Circulatory
Air Velocity0.45 mps ±0.05
Pressure GaugeMagnahelic Gauge for differential pressure indica-tion across the HEPA filter
LightCFL/LED
AccessoriesON/OFF Switch for motor, 5/15 amps switch sock-et for external equipment
Power Supply230 V AC, 10, 50 HZ/415V AC, 3-0, 50 Hz
Optional AccessoriesInternal Coving for easy cleaning SS-Perforated Platform for keep- ing Weighing Scale (Fix /Moveable) Filter chocking alarms FLP Electrical Goods for Explosion

Notes:

  1. Cleanroom equipment are fully tested prior to shipment & certified as per ISO standard.
  2. Due to continuous development, specifications are subject to change without prior notice.